This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Register the Cluster Controller

    This topic describes how to register a Cluster Controller (CC) with the Cloud Controller (CLC).

    Prerequisites

    • The Cloud Controller must be properly installed and started.
    • The Cluster Controller service must be properly installed and started.

    To register the Cluster Controller service with the Eucalyptus cloud

    On the CLC host machine, run the following command:

    euserv-register-service -t cluster -h IP -z ZONE SVCINSTANCE

    where:

    • SVCINSTANCE is the IP address of the CC you are registering with this CLC.
    • name should be a descriptive name for the zone controlled by the CC. For example: .
    • must be a unique name for the CC service. We recommend that you use the IP address of the machine

    For example:

    euserv-register-service -t cluster -h 10.111.5.182 -z zone-1 cc-10.111.5.182

    Copy the security credentials from the CLC to each machine running Cluster Controller services. Run this command on the CLC host machine:

    clcadmin-copy-keys -z ZONE HOST

    For example:

    clcadmin-copy-keys -z zone-1 10.111.5.182

    Repeat the above steps for each Cluster Controller in each zone. Verify that the Cluster Controller service is registered with the following command:

    euserv-describe-services SVCINSTANCE

    The registered Cluster Controller service is now ready for your cloud.